manualshive.com logo in svg

Epson LX-300+II RTP, Reference Manual

Share
Download
Epson LX-300+II RTP Reference Manual Download Page 62

62      

Using the Printer Software

❏

If the printer driver was installed on the client previously, you 
need to select the new printer driver or the current printer 
driver when prompted.

❏

If the operating system on the printer server is Windows NT, 
go to the next step. If it is not Windows NT, go to “Installing 
the printer driver from the CD-ROM” on page 62.

5. Select whether to use the printer as the default printer, then 

click 

OK

.

6. Click 

Finish

.

Installing the printer driver from the CD-ROM

This section describes how to install the printer driver on the 
clients when the server and clients use different operating 
systems.

Note:

❏

When installing on Windows 2000, XP, or NT clients, you must 
access Windows as the Administrator. 

❏

If the computers of the server and clients use the same OS and the 
same architecture, you 

do 

not have to install the printer drivers from 

the CD-ROM.

1. Access the shared printer. When you see the prompt, click 

OK

, and follow the on-screen instructions to install the 

printer driver from the CD-ROM.

Summary of Contents for LX-300+II RTP






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands