manualshive.com logo in svg

Epson LX-300+II RTP, Reference Manual

Share
Download
Epson LX-300+II RTP Reference Manual Download Page 93

Maintenance and Troubleshooting       

93

Continuous paper does not feed properly

Paper feeding is crooked or the paper jams.

Cause

What to do

The paper was not fed 
correctly or is the wrong 
type.

Turn off the printer and pull out the 
paper. Insert a new sheet straight into 
the paper guide. Make sure you’re using 
the right type of paper. See the paper 
specifications on page 115.

Paper does not eject completely.

Cause

What to do

The paper may be too long.

Press the 

LF/FF

 button to eject the page. 

Use paper that is within the specified 
range. See the paper specifications on 
page 115.

The tractor does not feed the paper.

Cause

What to do

The paper release lever 
may be in the wrong 
position.

Check that the paper release lever is 
pulled forward to the continuous-paper 
position. 

The paper may have come 
off the tractor.

Reattach the paper to the tractor.

Summary of Contents for LX-300+II RTP






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands