manualshive.com logo in svg

Epson LX-300+II RTP, Reference Manual

Share
Download
Epson LX-300+II RTP Reference Manual Download Page 85

Maintenance and Troubleshooting       

85

Using the error indicators 

If your printer stops working and one or more control panel 
lights are on or flashing or the printer beeps, use the following 
table to diagnose and fix the problem. If you cannot fix your 
problem using this table, go to the next section.

Panel light
state

Beep 
pattern

Problem

Solution

n

 Pause

–

The printer is paused.

Press the 

Pause

 button to resume printing.

•••

Paper from another paper source is 
currently in the paper path.

Move the paper release lever to the 
correct position and press the 

Load/Eject

 

button to clear the paper from the paper 
path. Then set the lever to the position 
you want to use. Press the 

Pause

 button to 

turn off the Pause light, if necessary.

n

 Paper Out

n

 Pause

•••

No paper is loaded in the selected paper 
source.

Load paper in the printer. Then press the 

Pause

 button to turn off the Pause light, if 

necessary.

•••

The paper is not loaded correctly.

Remove your paper and reload it. Then 
press the 

Pause

 button to turn off the 

Pause light, if necessary.

•••

Paper is jammed in the printer.

Turn off the printer and open the printer 
cover, tear off the paper supply, and turn 
the paper feed knob to eject the 
remaining paper. 

Summary of Contents for LX-300+II RTP






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands