manualshive.com logo in svg

Epson LX-300+II RTP, Reference Manual

Share
Download
Epson LX-300+II RTP Reference Manual Download Page 34

34      

Using the Printer Software

Accessing the Printer Driver 

You can access the printer driver from your Windows 
applications or from the Start menu:

❏

When you access the printer driver from a Windows 
application, any settings you make apply only to the 
application you are using. See “From Windows 
applications” on page 34 for more information.

❏

When you access the printer driver from the Start menu, the 
printer driver settings you make apply to all your 
applications. See “From the Start menu” on page 36 for more 
information.

Note:

While many Windows applications override the settings made with the 
printer driver, some do not. Check your printer driver settings to make 
sure they are correct for your document.

From Windows applications

Follow these steps to access the printer driver from a Windows 
application:

1. Select 

Print 

or 

Print

 

Setup

 from the File menu of your 

application. 

Note:

The screens you see may differ from the illustrations, depending on 
your operating system; however, the instructions are the same.

Summary of Contents for LX-300+II RTP






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands