manualshive.com logo in svg

Epson LX-300+II RTP, Reference Manual

Share
Download
Epson LX-300+II RTP Reference Manual Download Page 42

42      

Using the Printer Software

Monitoring settings 

Using EPSON Status Monitor 3

EPSON Status Monitor 3 allows you to monitor your printer’s 
status, alerts you when printer errors occur, and provides 
troubleshooting instructions when needed. It is available when:

❏

The printer is connected directly to the host computer via 
the parallel port [LPT1] or the USB port, and

❏

Your system is configured to support bidirectional 
communication.

Status Monitor 3 is installed when you install the printer driver 
(as described in the 

User’s Guide

). When sharing the printer, be 

sure to set Status Monitor 3 so that the shared printer can be 
monitored on the printer server. See “Setting up EPSON Status 
Monitor 3” on page 43 and “Setting up the printer server” on 
page 47.

Note:

When connecting to a shared printer beyond a router, error and 
warning notifications for the shared printer during printing are not 
available in some cases because of the router's settings.

Before using EPSON Status Monitor 3, be sure to read the README 
file on the CD-ROM. This file contains the latest information on the 
utility.

Setting

Explanation

EPSON Status 
Monitor 3

You can access EPSON Status Monitor 3 when you 
click this button. To monitor the printer, make sure the 
Monitor the printing status check box is selected.

Monitoring 
Preferences

Click this button to open the Monitoring Preferences 
window, where you can make settings for EPSON 
Status Monitor 3. See “Setting up EPSON Status 
Monitor 3” on page 43 for more information.

Summary of Contents for LX-300+II RTP






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands