![Epson LX-300+II RTP Reference Manual Download Page 91](http://html.mh-extra.com/html/epson/lx-300-ii-rtp/lx-300-ii-rtp_reference-manual_2419041091.webp)
Maintenance and Troubleshooting
91
Printed characters are not what you expected
The print position is not what you expected
The typestyles or characters you sent with your software did
not print.
Cause
What to do
The software may not be
properly configured.
Check that the software is correctly
configured for your printer.
The font selected on the control panel does not print.
Cause
What to do
Your software may be
overriding your control
panel setting.
Check the font setting in your
application software.
Printing starts too high or too low on the page, or the bottom
part of one page is printed at the top of the next page.
Cause
What to do
Your application software
settings may be incorrect.
Check the margin or top-of-form
position setting in your application
software.
Page length does not match the length of the paper.
Cause
What to do
The page length setting in
your application may be
incorrect.
Check the page length set by your
application software and adjust it if
necessary.