Epson Livingstation LS47P2 User Manual Download Page 123

Page: 123 / 138

Solving Problems

123

Slide the printer back onto its guiderails and align the screws with the screw holes on each
side.

Tighten the screws securely.

Slide in the printer until it stops. If the printer catches on the opened printer door
beneath it, gently hold the cover down and out of the way as you slide the printer in.

Push in on the printer lock as you turn it clockwise to tighten it. If it doesn’t tighten, push
the printer in further and try again.

Flip up the lock cover.

Close the printer cover.

Caution

Make sure to lock the
printer securely and close
the lock cover completely
or the printer won’t print.

Summary of Contents for Livingstation LS47P2











































































































































Search results

Summary of Contents for Livingstation LS47P2

Reviews:

Related manuals for Livingstation LS47P2

Brands by name

Popular brands

Epson Livingstation LS47P2, User Manual

Search results

Summary of Contents for Livingstation LS47P2

Reviews:

Related manuals for Livingstation LS47P2

Brands by name

Popular brands