Epson LivingStation LS47P1D, User Manual

Page: 27 / 139

Setting Up the TV
27
VCR and Satellite Receiver Connection
1
Turn off and unplug your TV, VCR, and satellite receiver.
2 Connect the VCR as described in “VCR Connection” on page 24.
3
Connect the satellite antenna cable to the
Satellite In
connector on your satellite
receiver.
4
Connect one end of an S-video cable to one of the S-video connectors on your satellite
receiver.
(If your satellite receiver uses a DVI connection, connect a DVI cable instead, as shown
on page 21. If it uses a component video connection, connect it as shown on page 22.)
5
Connect the other end of the S-video cable to one of the S-video connectors on your
VCR.
6
Connect one end of a standard, red/white audio cable to the
R
and
L Audio Line Out
connectors on your satellite receiver.
7
Connect the other end of the audio cable to the
R
and
L Audio Line In
connectors on
your VCR.
Note
Before connecting a
satellite receiver to the TV,
be sure to read any
instructions that came with
the receiver.
Note
If your satellite receiver
doesn’t have an S-video
connector, you can
connect a video cable
(yellow) to the Video
connectors instead of the
S-video cable using these
instructions.
It’s best to connect your
satellite receiver to the
S-Video connectors on the
back of the TV to free up
the S-Video connector on
the front to connect a
camcorder.