Epson LivingStation LS47P1D, User Manual

Page: 14 / 139

14
Setting Up the TV
Connecting an ATSC/NTSC Tuner
Follow these instructions to connect an ATSC/NTSC tuner to your TV.
1
Turn off and unplug your TV and tuner.
2 Slide the RESOLUTION SELECT switch on the back of the tuner to 1080i .
3
Connect your antenna cable to the
ANT. IN
jack on the tuner.
4 Connect one end of a component video cable to the Y (green), PB (blue), and PR (red)
connectors on the back of the TV, as shown below. Be sure to match the colors of the
cables to the colors of the connectors.
5
Connect the other end of the cable to the
Y
,
PB
, and
PR
connectors on the tuner.
6 Connect one end of a standard audio cable (with red/white connectors) to the
L–Audio–R
connectors on the back of the TV.
7 Connect the other end of the cable to the R and L Audio Out connectors on the tuner.
Note
For more information on
connecting an antenna,
see the tuner
Owner’s
Manual .
RESOLUTION
SELECT
ATSC/NTSC tuner
Audio cable
Component video
cable
Set to 1080i
Antenna cable
Note
To use the TV remote
control to operate the
tuner, see page 35. For
more information on using
the tuner, see the
Owner’s
Manual that came with it.