Epson FX-2170 - Impact Printer User Manual Download Page 84

Page: 84 / 157

Press the

Load/Eject

button to move the loading position

down on the page,

press the

LF/FF

button to move the

loading position up on the page.

For continuous paper, mark a point 6.5 mm above the perforation

and position the paper as shown. This gives you an 8.5 mm

margin.

Note:

The printer has a minimum and maximum loading position. If

you try to advance the loading position beyond these limits,

the

printer beeps and the paper stops moving.

When the paper reaches

the factory-set

loading position, the

printer beeps and paperfeeding pauses briefly. Use

the factory

setting as a reference

point

when adjusting the loading position.

3-14

using the Printer

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands