Epson FX-2170 - Impact Printer User Manual Download Page 61

Page: 61 / 157

5. Slide the left sprocket to the left margin of the paper using the

scale at the rear of the tractor as a guide. (Printing starts at the

“0” mark. See the Appendix for more information on the left

margin position.) Then slide the right sprocket to match the

width of your paper, but do not lock it.

6. Make sure your paper has a clean, straight edge. Open the

sprocket covers and insert paper from either the top, rear, or

bottom paper slot. Then fit the holes of the paper over the

tractor pins.

7. Close the sprocket covers.

8. Slide the right sprocket to remove any slack in the paper; then

lock it in place.

2-20 Paper Handling

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands