Epson FX-2170 - Impact Printer User Manual Download Page 65

Page: 65 / 157

Caution:

Make sure you tear off your printed document

before

pressing

the

Load/Eject

button.

Reverse feeding several pages at a time may

cause a paper jam.

Switching Between Continuous Paper and Single

Sheets

When using the push tractor in the front or rear position, you can

easily switch between continuous and single-sheet printing

without removing the paper.

Switching to

single

sheets

To switch from continuous paper to single sheets, follow these

steps:

1. If any printed sheets remain in the printer, press the

Tear Off /Bin

button to advance the paper to the tear-off

position.

2. Tear off the printed pages.

Caution:

Always tear off paper before back-feeding paper through

the printer; back-feeding too many sheets can cause a

paper jam.

Never back-feed labels. Labels can easily come off their

backing and jam the printer.

Press the

Load/Eject

button. The printer feeds the continuous

paper backward to the standby position. The paper is still

attached to the push tractor but is no longer in the paper path.

4. Move the paper release lever to the single-sheet position.

5. Adjust the edge guides to match the width of your paper.

2-24 Paper Handling

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands