Epson FX-2170 - Impact Printer User Manual Download Page 74

Page: 74 / 157

Buttons

Operate

Press this button to turn the printer on or off.

Pause

Press this button to temporarily stop printing and to resume

printing. Holding it down for at least 3 seconds when the printer

is in the standby mode enables the micro adjust function. Pressing

it again disables this function. See “Micro Adjust” later in this

chapter for details.

Load/Eject

Press this button to load single-sheet or continuous paper to the

loading position. However, the printer normally loads paper

automatically. If single-sheet paper is already in the loading
position, use this button to eject the sheet. If continuous paper is

in the loading or tear-off position, press this button to feed it

backward to the standby position.

LF/FF

(line feed/form

feed)

Press this button briefly to feed the paper forward one line. Hold

the button down to eject a single sheet of paper or advance

continuous paper to the top of the next page. You can also use this

button to load a single sheet of paper from the cut-sheet feeder or

to feed continuous paper from the standby position to the loading

position.

Tear Off /Bin

Pressing this button moves a page to the tear-off position, and

pressing it again moves the next page to the top-of-feed position.

When cut sheets are used, pressing it selects the cut-sheet feed bin

number. Use the Card mode (Bin 1 selected) to print on postcards.

3-4

using the Printer

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands