Epson FX-2170 - Impact Printer User Manual Download Page 48

Page: 48 / 157

4. While aligning the paper’s left and right edges with the edge

guides, insert the paper firmly until it meets resistance. After a

few seconds, the printer loads the paper to the loading

position. You are now ready to print.

Note:

Always close the printer cover before printing. The printer stops printing

when the cover is open.

Caution:

Do not use the knob on the right side of the printer except to clear

paper jams when the printer is off. Otherwise, you may damage

the printer or cause it to lose the top-of-form position.

If the platen turns but the printer doesn’t load the paper,

completely remove the paper and re-insert it more firmly.

To eject the paper, press the

Load/Eject

button.

Paper Handling 2-7

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands