Epson FX-2170 - Impact Printer User Manual Download Page 52

Page: 52 / 157

Using the pull tractor position

Before installing the tractor in the top position, you need to

remove it from its current position (front) by pressing the tractor’s

lock tabs while you lift it off the printer.

1. Make sure the printer is turned off.

2. Lift the printer cover and paper guide up and off the printer.

3. Grasp both ends of the clear plastic paper-tension unit, raise the

front of the unit, and lift it off the printer.

Note:

Check the paper thickness lever position to ensure that it wasn’t moved

during pull tractor installation. See ‘Adjusting the paper thickness

lever” later in this chapter for the correct lever position.

Warning:

Never move the print

head while the printer is turned on; this can

damage the printer. Also, if you just used the printer, the print

head may be hot. Let it cool for a few minutes before touching it.

Paper Handling 2-11

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands