Epson FX-2170 - Impact Printer User Manual Download Page 95

Page: 95 / 157

Switching to the cut-sheet feeder

1. If any printed continuous paper remains in the printer, press the

Tear Off/Bin

button to advance the paper to the tear-off

position.

Tear off the printed pages.

Press the

Load/Eject

button. The printer feeds the paper

backward to the standby position. The paper is still attached

to the push tractor but is no longer in the paper path.

4. Move the printer’s paper release lever to the single-sheet

position.

5. Move the cut-sheet feeder’s paper selection lever to the

single-sheet position.

Selecting single-sheets, postcards, or envelopes

You can select either single-sheet paper, postcards, or envelopes

using the lever on the first bin. You’ll see the icons next to the

lever. Move the lever to the proper position before loading your

paper.

Using Printer Options

4-7

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands