Epson FX-2170 - Impact Printer User Manual Download Page 106

Page: 106 / 157

Transporting the Printer

If you need to transport your printer some distance, carefully

repack it using the original box and packing materials, as

described below:

Turn off the printer.

Unplug the power cord from the electrical outlet; then

disconnect the interface cable from the printer.

Remove the paper guide.

Remove the optional pull tractor, cut-sheet feeder, or roll-paper

holder if installed.

Remove the ribbon cartridge.

Remove the paper-tension unit. Attach the protective locking

clip to the paper-tension unit, and then replace the paper

tension unit.

Make sure the standard tractor is installed in the push tractor

position.

Repack the printer, ribbon cartridge, paper guide, and power

cord in the original packing materials and place them in the

printer’s original box.

5-4

Maintenance and Transportation

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands