Epson FX-2170 - Impact Printer User Manual Download Page 114

Page: 114 / 157

Paper feeding is crooked or the paper jams.

Turn off the printer and pull out the paper. Insert a new sheet

straight into the paper guide. Be sure, you’re using the right

type of paper. See the paper specifications in the Appendix.

Make sure that the printer cover is closed.

Paper does not eject completely.

Use

the LF/FF

button to eject the page.

Make sure the printer cover is closed.

The paper may be too long. Use paper that is within the

specified range. See the paper specifications in the Appendix.

Continuous paper does not feed properly

The tractor does not feed the paper.

Check that the paper release lever is pulled forward to the

continuous paper position. If not, move the lever to the correct

position.

The paper may have come off the tractor. Re-attach the paper

to the tractor.

6-8 Troubleshooting

Summary of Contents for FX-2170 - Impact Printer






























































































































































Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands

Epson FX-2170 - Impact Printer, User Manual

Search results

Summary of Contents for FX-2170 - Impact Printer

Reviews:

Related manuals for FX-2170 - Impact Printer

Brands by name

Popular brands