14
(3)
Vibration resistance
(a)
When packed
Vibration conditions
Frequency:
5 to 55 Hz
Acceleration:
Approximately 19.6 m/s² {2 G}
Sweep:
10 minutes (half cycle)
Duration:
1 hour
Directions:
x, y, and z
Test method
After applying vibration under the above conditions, visually inspect the interior and exterior and check
operation.
Test result
No visible exterior or interior damage, and no abnormal operation.
(4)
Impact resistance
(a)
When packed
Drop conditions
Packing method: Epson standard package
Height:
60 cm {23.62"}
Directions:
1 corner, 3 edges, and 6 surfaces
Test method
After dropping under the above conditions, visually inspect the interior and exterior and check
operation.
Test result
No visible exterior or interior damage, and no abnormal operation.
(b)
When unpacked
Drop conditions
Height:
5 cm {1.97"}
Directions:
Lift one edge and release it (for all 4 edges)
Test method
After dropping under the above conditions, visually inspect the interior and exterior and check
operation.
Test result
No visible exterior or interior damage, and no abnormal operation.
Summary of Contents for EU-m30 Series
