37
(2)
Starting the mode
Step 1:
With the roll paper cover closed, turn the printer power on while pressing the Feed button until printing
of the printer status starts.
Step 2:
After the printer status is printed, press the Feed button until printing of the instructions for operation
method starts.
Step 3:
After the instructions for operation are printed, press the Feed button three times.
Step 4:
Then, press and hold the Feed button until printing of the software setting mode starts.
Step 5:
The instructions for the setting method are printed. Perform settings in accordance with the
instructions.
(3)
Ending the mode
After completing the setting, the set content is stored, and the printer is initialized.
When printer initialization ends, the printer is ready for normal printing.
3.8.4
Initial setting restoration mode
(1)
Initial setting restoration function
Restores current settings to the saved settings (if settings have been saved for restoration).
(2)
Starting the mode
Step 1:
With the roll paper cover closed, turn the printer power on while pressing the Feed button until printing
of the printer status starts.
Step 2:
After the printer status is printed, press the Feed button until printing of the instructions for operation
method starts.
Step 3:
After the instructions for operation are printed, press the Feed button four times.
Step 4:
Then, press and hold the Feed button until printing of the initial setting restoration mode starts.
Step 5:
After the instructions are printed, press the Feed button once.
Step 6:
Press and hold the Feed button until the restoration complete message is printed.
(3)
Ending the mode
Turn the power off.
3.9
Error Processing
3.9.1
Errors that recover automatically
(1)
Head temperature error
Error contents:
Detected a (hot) head temperature in excess of the appropriate range.
LED display pattern: See 3.4.2.
Recovery method:
Automatically stops printing and automatically recovers when the head
temperature drops.
(2)
Roll paper cover open error
Error contents:
Detected the roll paper cover was open during printing.
LED display pattern: See 3.4.2.
Recovery method:
Automatically recovers when the roll paper cover is closed.
Summary of Contents for EU-m30 Series
