15
(c)
When using included mounting brackets (impact resistance test specifications)
Impact acceleration:
Approximately 147 m/s² {15 G}
Operation time:
11 ms
Direction, count:
1 time each in Y, Z directions
Point of impact:
Unit installation point
Note: See Appendix M if impact may possibly be applied in X direction.
Figure 1.13.2 Direction of Impact
(5)
Acoustic noise
(a)
Operation noise
Test conditions:
Epson standard
Test method:
Epson standard
Measuring result:
Approx. 60 dB (Bystander position)
Note: Measured value fluctuates depending on the paper used and the print conditions (print pattern, print
speed, print density, etc.).
(6)
Altitude
3000m or less
1.14
Installation
Install in a level place.
See Appendix M for details.
1.15
Interface
1.15.1
Interfaces equipped
Note: For details about printing on models equipped with multiple interfaces, see 3.13 Printing Using Multiple
Interfaces.
Standard, for specified customer
USB interface
RS-232 serial interface
Z direction
Y direction
X direction
Summary of Contents for EU-m30 Series
