Epson EU-m30 Series, Developer'S Manual

Page: 38 / 85

31
Function Selectable values Factory setting
Selection of the interface Fixed to serial interface
Fixed to built-in USB
Serial/USB automatic switching
All interfaces enabled All interfaces
enabled
Command execution (offline) Enabled/Disabled Enabled
Specification for the top margin by backfeed *3 9.5 to 2 mm (in 0.5 mm units) 9.5 mm {0.37"}
Switchover time for a valid interface 1 to 10 seconds (1 second units) 1 second
Selection of primary connection interface Auto (Interface where data was first
received)/Serial/USB/No primary
connection
Auto
Power supply capacity *5 Power supply capacity level 1 to 3 Capacity: High
Autocutting of roll paper when the roll paper
cover is closed
Does not cut/cuts Cuts
(ARP) Reduction of excessive top margin Does not reduce/reduces Does not reduce
(ARP) Reduction of excessive bottom margin Does not reduce/reduces Does not reduce
(ARP) Reduction ratio of line spacing Does not reduce/reduces 25%/
reduces 50%/reduces 75%
Does not reduce
(ARP) Reduction ratio of line spacing where extra
line feeds are included
Does not reduce/reduces 25%/
reduces 50%/reduces 75%
Does not reduce
(ARP) Reduction ratio of bar code height Does not reduce/reduces 25%/
reduces 50%/reduces 75%
Does not reduce
(ARP) Reduction ratio of character height Does not reduce/reduces 25%/reduces
50%/reduces 75%/reduces 75% and
shortens character height
Does not reduce
Font A auto replacement Does not replace/Font B/Font C Does not replace
Font B auto replacement Does not replace/Font A/Font C Does not replace
Font C auto replacement Does not replace/Font A/Font B Does not replace
Print density during multi-tone printing 70 to 130% (In 5% units) 100%
Buzzer function: Optional external buzzer
enabled/disabled
*For specified customer only
Enabled/Disabled Disabled
Buzzer function: Buzzer frequency (Error) *1 Does not sound/sounds 1 time/
Sounds continuously
Sounds
continuously
Buzzer function: Sound pattern (Autocut) *1 Patterns A to E Pattern A
Buzzer function: Buzzer frequency (Autocut) *1 Does not sound/sounds 1 time Sounds 1 time
Buzzer function: Sound pattern (Pulse 1) *1 Patterns A to E Pattern A
Buzzer function: Buzzer frequency (Pulse 1) *1 Does not sound/sounds 1 time Sounds 1 time
Buzzer function: Sound pattern (Pulse 2) *1 Patterns A to E Pattern B
Buzzer function: Buzzer frequency (Pulse 2) *1 Does not sound/sounds 1 time Sounds 1 time
Command-compatible mode EU-m30/TM-m30/TM-m30II EU-m30
Selection of batch print enabled/disabled and
print direction
Disabled/enabled (forward)/enabled
(reverse)
Disabled
*1: The functions are enabled for the optional external buzzer. *For specified customer only
*2: For the method for changing the paper width, see Appendix I.
*3: For notes on using the backfeed, see Appendix J.