212
5.
Click
Start
to begin the cleaning cycle.
Caution:
Never turn off the product during a cleaning cycle or you may damage it.
6.
When the cleaning cycle is finished, you can check to see if the nozzles are clean; click
Print Nozzle
Check Pattern
and click
.
7.
Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click
Finish
.
• If there are gaps or the pattern is faint, click
Clean
to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic:
Related tasks
Checking the Nozzles Using a Computer Utility
Power Cleaning Using a Computer Utility
Cleaning the Print Head Using the Product Control Panel
Summary of Contents for ET-7700
