210
6.
Select
Head Cleaning
and press the
OK
button.
7.
Press the
start button to clean the print head. You see a message on the LCD screen during the
cleaning cycle.
Caution:
Never turn off the product during a cleaning cycle or you may damage it.
When the cleaning cycle is finished, you see a completion message on the LCD screen.
8.
Select
Check
and press the
OK
button.
9.
Press the
start button to print a nozzle check pattern and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Power Cleaning Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Related topics
Summary of Contents for ET-7700
