Universal Print Settings:
These print settings are applied when you print by an external device without using the printer driver.
The offset settings are applied when you print using the printer driver.
Top Offset:
Adjust the top margin of the paper.
Left Offset:
Adjust the left margin of the paper.
Top Offset in Back:
Adjust the top margin for the back of the page when performing 2-sided printing.
Left Offset in Back:
Adjust the left margin for the back of the page when performing 2-sided printing.
Skip Blank Page:
Skips blank pages in the print data automatically.
Auto Error Solver:
Select an action to perform when a 2-sided printing error or a memory full error occurs.
❏
On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints
only what the printer could process when a memory full error occurs.
❏
Off
Displays an error message and cancels printing.
Quiet Mode:
Select
On
to reduce noise during printing, however, this may lower the print speed. Depending on
the paper type and print quality settings you selected, there may be no difference in the printer's noise
level.
Ink Drying Time:
Select the ink drying time you want to use when performing 2-sided printing. The printer prints the
other side after printing one side. If your printout is smeared, increase the time setting.
PC Connection via USB:
Select
Enable
to allow a computer to access the printer when connected by USB. When
Disable
is
selected, printing and scanning that is not sent over a network connection is restricted.
Related Information
&
Network Settings
Select the menus on the control panel as described below.
>
>
254
