Epson EPL-9000, Service Manual

Page: 101 / 162

Disassembly andAssemMy
3.2.4 Paper Transportation Section Disassembly
This section describes how to disassemble the paper transportation section.
3.2.4.1 Link Assembly Removal
1. Remove thetopcover. (Refer toSection3.2.l.2.)
2. Remove theleftcover. (Refer to Section
3. Pull out the paper cassette about
(3.94 inches) towards the front.
4. Open the front cover unit.
Remove the shatter lever.
6. Remove
2
CBB screws x 8) securing the link assembly, and remove it from the ROS unit
frame.
7. Remove the link assembly while opening the
Shatter Lever
Figure 3-23. Removing the Link Assembly
3.2.4.2 Roll Assembly Removal
front
2.
Disconnect connectors P/J26and from the roll assembly.
3. Remove 3 screws x 8) securing the assembly. (1 screw holds the earth
wire.)
4. Remove the roll assembly.
Figure 3-24. the Roll Assembly
3-16
Rev.