Disassembly and Assembly
Manual
3.2.4.5
Front Cover Removal
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Remove the
tray. (Refer to Section 324.13.)
Remove the rear cover. (Refer to Section 3.2.1.1.)
Remove
top cover.
to Section 3.2.1.2.)
Remove the left cover.
to
3.2.1.3.)
Remove the right cover. (Refer to Section 3.2.1.4.)
Remove the ELEC cover. (Refer to Section 3.2.2.1.)
Remove the link assembly. (Refer to Section 3.2.4.1.)
Disconnect connector
from the MCU PWB board.
connector
from the EXIT sensor on the fusing unit.
and
from the
Remove
screw
x
6) securing the earth wire to the front frame.
Figure 3-27. Removing the Front Cover (1)
Remove 2
screws
x
6) securing the front cover, and remove it.
Remove the retard pad from front cover.
Figure 3-28. Removing the Front Cover (2)
3-18
Rev.
Summary of Contents for EPL-9000
