Disassembly and
3.2.2.3 Engine Controller Board
Removal
1. Remove therearcover.
Section
2. Remove thetopcover. (Refer to Section
3. Remove theleftcover.
4. Remove therightcover. (Refer to Section
5. Remove the ELECcover. (Refer to Section
6.
connectors
and
from the
engine controller board.
7. Remove 5 CBB screws
x
6) securing the engine
driver board, and remove it.
Figure 3-8. Removing the
Board
3.2.2.4 High Voltage
Board
Board) Removal
1.
2.
3.
4.
5.
6.
7.
8.
Remove the rear cover. (Refer to Section 3.2.1.1.)
Remove the top cover. (Refer to Section 3.2.12)
Remove the
(Refer to Section 3.2.13.)
Remove the right cover.
to Section 3.2.1.4.)
Remove the ELEC cover. (Refer to Section 322.1.)
P/Jill,
DS, TR, and
from the
Remove the volume adjustment knob.
Remove 5
screws
x 8) securing the HVPS board, and remove it.
-----
Figure 3-9. Removing the
Board
3-8
Rev. A
Summary of Contents for EPL-9000
