Epson EPL-9000, Service Manual

Page: 115 / 162

and Assembly
-
3.2.6.2 SENSOR Board
1. Remove the rear cover. 1.1.)
2. Remove (Refer to Section
3. Remove Section 3.2.13.)
4. Remove the right cover. (Refer to Section
5.
Remove the ELECcover. to Section
6. Remove the fusing unit. (Refer to Section
7. Disconnect connector
from the sensor.
8.
2
x 8) securing the
sensor it.
9. Remove x8) securing the sensor board, and remove it.
Figure 3-47. Removing the SENSOR Board
3.2.6.3 Erase Lamp Removal
1. Remove therear cover. (Refer to Section
2. Remove the fusing unit. (Refer to Section
3. Remove 3
screws x 8) securing the erase lamp, and remove it.
4 . ect the connector from the erase lamp.
. .
I
Figure 3-48. Removing the Erase Lamp
Rev.