Manual
Disassembly and Assembly
3.2.2.2
Video Controller Board
MAIN Board) Removal
1.
2.
3.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Remove the rear cover. (Refer to Section 3.2.1.1.)
Remove the top cover. (Refer to Section 3.2.1.2.)
Remove the left cover. (Refer to Section 3.2.1.3.)
Remove the right cover. (Refer to Section 3.2.1.4.)
Remove the shield cover. (Refer to Section 3.2.2.1. Steps 1 to 5)
Remove 2 CP screws
x
6) securing the font cartridge connector, and remove it.
Remove 3
screws
x 6) securing the font
guide and cover, and remove them.
Remove 2
screws
x 6) securing the option interface cover, and remove it.
Remove the option interface guide.
Remove 4
screws
x 6), 2 serial interface connector screws, and 2 small screws from the
rear shield cover, and remove it.
Disconnect
and
from the
MAIN board.
Remove 7 CP screws
x 6).
Remove the
MAIN board.
Figure 3-7. Removing the
MAIN Board
Rev. A
3-7
Summary of Contents for EPL-9000
