Epson EPL-9000, Service Manual

Page: 108 / 162

Service Manual
Disassembly and Assembly
3.2.5
Fusing Unit Removal and Disassembly
This section describes how to remove and disassemble the fusing unit.
3.2.5.1 Fusing Unit Removal
1. Remove the top cover. (Refer to Section 3.2.1.2.)
2. Disconnect from the eject sensor.
3 Remove CB screw x 6) securing the fusing unit.
4. Loosen 2 screws securing the fusing unit, and remove it.
Figure 3-37. Removing the Fusing Unit
3.2.5.2 Pressure Roller Removal
1. Remove the top cover. (Refer to Section 3.2.1.2.)
2. Remove the fusing unit. (Refer to Section
3 Remove 2
screws x 8) securing the fusing unit top cover,
and
remove it.
4. Remove 2 screws x 8) securing the fusing unit cover R, and remove it.
5. Remove 2 screws x 8) securing the fusing unit cover L, and remove it.
6. Remove 1 CB screw x 6) on the fusing unit frame.
7. Remove the pressure roller.
Figure 3-38. Removing the Pressure
Roller
Rev.
3-23