Epson EMP-505, User Manual

Page: 33 / 168

Creating Scenarios (EMP SlideMaker) -
31
Engl
ish
4
When a confirmation message is displayed, click the [
OK
] button.
5
When the transmission is complete, a message asking whether or not to specify the
Autorun settings appears. To select the Autorun or repeat settings, click the [
Yes
]
button and proceed to the next step. If the Autorun and repeat settings are not be
specified, click the [
No
] button to finish.
6
Change the settings and click the [
OK
] button.
All scenario files stored on the memory card will be displayed in the scenario file list at
the left.
To automatically project a scenario when EasyMP is started, set up Autorun by selecting
the desired scenario from the scenario file list, then clicking the [
>>
] button. The
scenario for which Autorun has been set up will be displayed in the Autorun scenario file
list at the right.
To repeatedly project a scenario from the beginning, set up repeat projection by selecting
the desired scenario from the scenario file list, then putting a check mark beside
[ Revive ].
Memo
The Autorun settings can also be specified by selecting [
Scenario Option
], then
[
Edit Autorun
] before sending a scenario.