Epson EMP-505, User Manual

Page: 19 / 168

Starting the EasyMP Software -
17
Engl
ish
♦
Operating EasyMP
With EasyMP running, this projector’s remote control functions as the input device. The basic
operations of the input device are as follows:
•
Moving the pointer
When the [
Enter
] button of the remote control is tilted up, down, right or left, as with tracking
points, the cursor on the EasyMP screen moves in that direction.
•
Selecting and executing a function
When the cursor is positioned on an icon on the screen and the [
Enter ] button of the remote
control is pressed, the function assigned to the selected icon will be executed.
♦
Exiting from EasyMP
There is no concept of exiting from EasyMP. To switch to another image source such as a video,
just press the appropriate input-source button on the remote control. This can even be done while
running EasyMP. To end the projection, press the [
Power ] button on the remote control or on the
projector’s operation panel twice, even while EasyMP is being used. The power to the projector
will then be turned off.
Point
•
If a memory card is not inserted, the message "There is no memory card." is displayed and
the EasyMP functions cannot be used.
•
If a scenario with an autorun setting is stored on a memory card, the projection of that
scenario will start once the power to the projector is turned on.
•
Even when the projector is displaying images from another image source (computer or video
equipment), once a memory card storing a scenario with an autorun setting is inserted, the
screen display of the projector automatically changes to the EasyMP screen and the scenario
on the memory card is projected.
•
You can select the display of the EasyMP screen from the following languages: English,
Japanese, French, German, Italian, Spanish, Portuguese, Chinese and Korean. Change the
display language by selecting [ Advanced ], then [ Language ] from the setup menu of the
projector’s main unit. (Refer to "Menu Operation" in the Owner’s Manual for the projector.)