Setting Up Projector Network E-Mail Alerts
126
You can set up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
If you set the
Standby Mode
setting to
Communication On
in the projector's
ECO
menu, you can receive the e-mail alerts even if the projector is in
standby mode (when the power is off).
a
Press the [Menu] button on the control panel or remote control.
b
Select the
Network
menu and press [Enter].
c
Select
Network Configuration
and press [Enter].
d
Select the
Notifications
menu and press [Enter].
e
Set the
Mail Notification
setting to
On
.
f
Enter the IP address for the
SMTP Server
option.
a
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
g
Select a number for the SMTP server
Port Number
, from 1 to 65535
(default is 25).
h
Choose an address field, enter the e-mail address, and select the alerts
you want to receive. Repeat for up to three addresses.
a
Your e-mail address can be up to 32 alphanumeric characters
long.
i
When you finish selecting settings, select
Complete
and follow the on-
screen instructions to save your settings and exit the menus.
a
If a critical problem causes a projector to shut down, you may not
receive an e-mail alert.
g
g
Related Links
• "Network Projector E-mail Alert Messages"
• "Projector Setup Settings - ECO Menu"
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
• The email address set in
From
as the mail sender
•
Epson Projector
in the subject line
• The name of the projector experiencing a problem
• The IP address of the affected projector
• Detailed information about the problem
