Wireless Network Projection
107
•
Display LAN Info.
lets you set the display format for the projector's
network information.
a
Use the displayed keyboard to enter the name and password.
Press the arrow buttons on the remote control to highlight
characters and press [Enter] to select them.
g
Select the
Wireless LAN
menu and press [Enter].
h
Select the
Connection Mode
setting.
•
Quick
lets you connect to multiple smartphones, tablets, or
computers directly using wireless communication.
•
Advanced
lets you connect to smartphones, tablets, or computers
over a wireless network access point.
i
If you selected the
Advanced
connection mode, select
Search Access
Point
to select the access point you want to connect to.
a
If you need to assign the SSID manually, select
SSID
to enter the
SSID.
j
For the
Advanced
connection mode, assign the IP settings for your
network as necessary.
• If your network assigns addresses automatically, select
IP Settings
to
set the
DHCP
setting to
On
.
• If you must set addresses manually, select
IP Settings
to set the
DHCP
setting to
Off
, and then enter the projector's
IP Address
,
Subnet Mask
, and
Gateway Address
as necessary.
• If you want to connect the projector to the network using IPv6, select
IPv6 Settings
to set the
IPv6
setting to
On
, and then set the
Auto
Configuration
and
Use Temporary Address
settings as necessary.
k
To prevent the SSID or IP address from being displayed on the LAN
standby screen and Home screen, set the
SSID Display
setting or the
IP
Address Display
setting to
Off
.
l
When you have finished selecting settings, select
Complete
and then
follow the on-screen instructions to save your settings and exit the
menus.
m
Press the [LAN] button on the remote control.
The wireless network settings are complete when you see the correct IP
address on the LAN standby screen.