Projector Network Settings - Network Menu
156
Setting
Options
Description
IP Settings
DHCP
IP Address
Subnet Mask
Gateway Address
DHCP
: set to
On
if your network assigns
addresses automatically; set to
Off
to
manually enter the network's
IP
Address
,
Subnet Mask
, and
Gateway
Address
using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address,
255.255.255.255 or 0.0.0.0 through
254.255.255.255 for Subnet Mask, and
0.0.0.0, 127.x.x.x or 224.0.0.0 through
255.255.255.255 for Gateway Address.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen.
IPv6 Settings
Select the IPv6 settings if you want to
connect the projector to the network
using IPv6:
IPv6
IPv6
: set to
On
if you want to connect
the projector to the network using IPv6.
IPv6 is supported to monitor and control
the projector over a network using Epson
Web Control and PJLink.
Auto Configuration
Auto Configuration
: set to
On
to assign
addresses automatically according to the
Router Advertisement.
Use Temporary
Address
Use Temporary Address
: set to
On
if
you want to use a temporary IPv6
address.
Network Menu - Notifications Menu
Settings on the
Notifications
menu let you receive an email notification if a
problem or warning occurs in the projector.
s
Network
>
Network Configuration
>
Notifications
Setting
Options
Description
Mail Notification
On
Off
Set to
On
to send an email to the preset
addresses when a problem or warning
occurs with a projector.
SMTP Server
IP address
Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x,
192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255).
Port Number
1 to 65535 (default
is 25)
Select a number for the SMTP server
Port Number.
