Cut-Sheet Feeders
3.
Pull the paper-set levers on
each
side of the cut-sheet feeder all
the
way
forward until
the
paper guides retract and lock open to
allow for paper loading.
4.
Take a stack of paper and fan it. Next, tap the side and bottom
of
the
paper
on
a flat surface to even up the stack.
CAUTION:
Do not use multi-part forms, carbon paper, or
labels in the cut-sheet feeder.
5.
Insert up to
150
sheets
of paper or
up
to
30
air-mail or
25
plain
bond envelopes.
6.
Adjust
the
position of
the
right paper guide so that it
matches
your paper’s width. Make sure that the position of the guide
allows the paper to move freely up and down. Then lock the
right paper guide in place by pushing back on the lock lever.
Using Printer Options
4-7
