Micro
Feed
Adjusting the loading position
The loading position is the position of the paper after it has been
automatically loaded by the printer. If printing is too high or low
on the page, change
the
loading position with the micro-feed feature
as follows:
1. Make sure the printer is turned on.
2. Load either continuous or single-sheet paper. (Load continuous
paper by pressing the
LOAD/EJECT
button.) The
MULTI-PART
light
begins to blink.
Note: You can adjust
the
loading position only while the
MULTI-
PART
light is blinking.
3. While holding down the
ALT
button, press the
LOAD/EJECT
button to adjust the loading position to a lower position on the
page; press the
LF/FF
button to adjust
the
loading position to a
higher position on the page. The
MULTI-PART
light stops blinking
after a short time.
3-14
Using the Printer
