Epson AcuLaser CX28 Series, Reference Manual

Page: 132 / 328

Printing With NetWare 110
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 4.x Remote Printer Mode (NDS)
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that offers
the print service, and then click
Print Services Quick Setup on the Tools
menu.
4
Enter the appropriate names in the Printer Server Name, Printer Name,
Print Queue Name, and Print Queue Volume fields, select Other/
Unknown from the Printer type field, and then save the specified set-
tings.
"
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
5
In Administrator mode of Web-based EpsonNet config, select NetWare
from the Network tab, and then specify the following settings.
–
NetWare Print: Select Enable .
–
Frame Type:
Select
Auto . (Select the frame type according to the network envi-
ronment.)
–
Mode: Select NPrinter/RPrinter .
–
Printer Name:
Specify the printer name. (Default: AL-CX28-xxxxxx)
–
Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is
Auto .
6
Restart the printer (turn the printer off, then on again)
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that created printer is shown as
Waiting for Job for the con-
nected printer (0).