Epson AcuLaser C4200DN User Manual Download Page 412

Page: 412 / 475

412

Technical Specifications

❏

Carbon paper, carbonless paper, thermal-sensitive paper,

pressure-sensitive paper, acid paper, or paper that uses

high-temperature-sensitive ink (around 190 °C)

❏

Labels that peel easily or labels that do not cover the backing

sheet completely

❏

Coated paper or special surface-colored paper

❏

Paper that has binder holes or is perforated

❏

Paper that has glue, staples, paper clips, or tape on it

❏

Paper that attracts static electricity

❏

Moist or damp paper

❏

Paper of uneven thickness

❏

Overly thick or thin paper

❏

Paper that is too smooth or too rough

❏

Paper that is different on the front and back

❏

Paper that is folded, curled, wavy, or torn

❏

Paper of irregular shape, or paper that does not have right

angle corners

Printable area

:For Em

ulation

5-mm minimum margin on all sides. (The printable width should

be 207.9 mm or less.)

Note:

❏

The printable area varies, depending on the emulation mode in use.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands