Epson AcuLaser C4200DN User Manual Download Page 34

Page: 34 / 475

Printer Features and Various Printing Options

Pre-defined color settings in the printer driver

The printer driver offers many pre-defined settings for color

printing, allowing you to optimize print quality for various types

of color documents.

For Windows, see "Making the print quality settings" on page 62

for more information.

For Macintosh, see "Making the print quality settings" on page

147 for more information.

Toner save mode

To reduce the amount of toner used in printing documents, you

can print rough drafts using the Toner Save mode.

Resolution Improvement Technology and
Enhanced MicroGray technology

Resolution Improvement Technology (RITech) is an original

Epson printer technology that works by smoothing out the jagged

edges of diagonal and curved lines in both text and graphics.

Enhanced MicroGray improves the halftone quality of graphics.

Wide variety of fonts

The printer comes with a selection of 84 scalable fonts, and 7

bitmap fonts in ESC/Page mode to provide you with the fonts

you need to create professional-looking documents.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands