Epson AcuLaser C4200DN User Manual Download Page 20

Page: 20 / 475

Safety Instructions

❏

Follow all warnings and instructions marked on the printer.

❏

Unplug this printer from the wall outlet before cleaning.

❏

Use a well-wrung cloth for cleaning and do not use liquid or

aerosol cleaners.

❏

Avoid touching the components inside the printer unless

instructed to do so in the printer’s documentation.

❏

Never force printer components into place. Although the

printer is designed to be sturdy, rough handling can damage

it.

❏

Be sure to keep consumables out of the reach of children.

❏

Do not use printer in a damp environment.

❏

Do not leave jammed paper inside of the printer. This can

cause the printer to overheat.

❏

Never push objects of any kind through cabinet slots as they

may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock.

❏

Never spill liquid of any kind on the printer.

❏

Except as specifically explained in the printer’s

documentation, do not attempt to service this product

yourself. Opening or removing those covers that are marked

Do Not Remove

may expose you to dangerous voltage points

or other risks. Refer all servicing in those compartments to a

qualified service representative.

❏

Adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may

result in damage and may require repair by a qualified service

representative.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands