Epson AcuLaser C4200DN User Manual Download Page 200

Page: 200 / 475

200

Using the PostScript Printer Driver

7. Install the printer driver by following the on-screen

instructions. See "Installing the PostScript printer driver for

the parallel interface" on page 196 for details.

Installing the PostScript printer driver for the
network interface

:including the inform

ation about W

indow

s 95 / N

etw

ork is standard or option

See the appropriate sections below according to your operating

system, and follow the instructions to install the PostScript printer

driver for the network interface.

Note:

❏

Set the network settings before installing the printer driver. Refer

to the Network Guide that comes with your printer for details.

❏

Turn off all virus protection programs before installing the printer

software.

For Windows XP or 2000 users

1. Make sure that the printer is turned on. Insert the printer

software CD-ROM into your CD-ROM drive.

2. For Windows 2000, click

Start

, point to

Settings

, and click

Printers

. Then double-click the

Add Printer

icon.

For Windows XP, click

Start

, point to

Printer and Faxes

, and

click

Add a printer

in the Printer Tasks menu.

3. The Add Printer Wizard appears. Then click

4. Select

Local printer

, then click

Note:

Do not select the

Automatically detect and install my Plug

and Play printer

check box.

Summary of Contents for AcuLaser C4200DN




























































































































































































































































































































































































































































































Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands

Epson AcuLaser C4200DN, User Manual

Search results

Summary of Contents for AcuLaser C4200DN

Reviews:

Related manuals for AcuLaser C4200DN

Brands by name

Popular brands