Epson AcuLaser C2000, Administrator'S Manual

Page: 25 / 272

2
Connecting to the Network
2-7
Auto: Choose Auto when obtaining the IP address from a
DHCP server. The IP address is automatically obtained from
the Internal Print Server whenever the printer is reset or
turned on.
PING:
Choose PING when setting the IP address using
arp/ping commands. The Internal Print Server uses the IP
address set by arp/ping commands. The settings become
available when the printer is reset or turned off and on.
Note:
❏
When using Auto , a DHCP server must be installed in your
computer and must be correctly configured. See the online help
of your operating system for detailed instructions.
❏
Choose PING only when setting the IP address using arp/ping
commands.
7. Press the Item button until
IP Byte 1*
appears.
8. Press the Value button until the desired value appears. Then
press Enter to set the value.
Note:
To decrease the value, hold the Value button while pressing the
SelecType button.
9. Repeat steps 7 and 8 to set the IP address, subnet mask, and
default gateway.
10. Restart the printer to make the settings take effect.
11. Print a network status sheet to confirm the new IP address.
Note:
❏
You must first set the IP address before using EpsonNet WebAssist.
❏
See the Reference Guide for more information about settings on the
printer’s control panel.