EPS PSI 10000 4U Operating Manual Download

Page: 5 / 98

Page 5

EPS Stromversorgung GmbH

Alter Postweg 101 • 86159 Augsburg

Germany

Fon: +49 821 / 570451-0

Fax: +49 821 / 570451-25

www.eps-germany.de

[email protected]

PSI 10000 4U Serie

General

1.1

About this document

1.1.1

Retention and use

This document is to be kept in the vicinity of the equipment for future reference and explanation of the operation of

the device. This document is to be delivered and kept with the equipment in case of change of location and/or user.

1.1.2

Copyright

Reprinting, copying, also partially, usage for other purposes as foreseen of this manual are forbidden and breach

may lead to legal process.

1.1.3

Validity

This manual is valid for the following equipment including derived variants:

Model

PSI 10060-1000 4U

PSI 10360-240 4U

PSI 11000-80 4U

PSI 10080-1000 4U

PSI 10500-180 4U

PSI 11500-60 4U

PSI 10200-420 4U

PSI 10750-120 4U

PSI 12000-40 4U

1.1.4

Symbols and warnings

Warning and safety notices as well as general notices in this document are shown in a box with a symbol as follows:

Symbol for a life threatening danger

Symbol for general safety notices (instructions and damage protection bans) or important infor

mation for operation

Symbol for general notices

1.2

Warranty

EPS Stromversorgung guarantees the functional competence of the applied technology and the stated performance

parameters. The warranty period begins with the delivery of free from defects equipment.
Terms of guarantee are included in the general terms and conditions (TOS) of

EPS Stromversorgung.

1.3

Limitation of liability

All statements and instructions in this manual are based on current norms and regulations, up-to-date technology

and our long term knowledge and experience. The manufacturer accepts no liability for losses due to:

•

Usage for purposes other than designed

•

Use by untrained personnel

•

Rebuilding by the customer

•

Technical changes

•

Use of not authorized spare parts

The actual delivered device(s) may differ from the explanations and diagrams given here due to latest technical

changes or due to customized models with the inclusion of additionally ordered options.

Summary of Contents for PSI 10000 4U



































































































Search results

Summary of Contents for PSI 10000 4U

Reviews:

Related manuals for PSI 10000 4U

Brands by name

Popular brands

EPS PSI 10000 4U, Operating Manual

Search results

Summary of Contents for PSI 10000 4U

Reviews:

Related manuals for PSI 10000 4U

Brands by name

Popular brands