Page 25
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
www.eps-germany.de
PSI 10000 4U Serie
1.9.3
Scope of delivery
1 x Power supply device
2 x Remote sensing plug
1 x 1.8 m USB cable
1 x Set of DC terminal covers (only with models from 360 V)
1 x Sense terminal cover
1 x USB stick with documentation and software
1 x AC connector plug (clamp type)
1.9.4
Accessories
For these devices the following accessories are available:
IF-AB
Digital interface modules
Pluggable and retrofittable digital interface modules for RS232, CANopen, Profibus,
ProfiNet, ModBus TCP, EtherCAT or CAN are available. Details about the interface
modules and the programming of the device using those interfaces can be found in
separate documentation. It’s usually available on the USB stick which is included with
the device, or as PDF download on our website.
1.9.5
Options
These options are usually ordered along with the device, as they are permanently built in or preconfigured during
the manufacturing process. Post-ordering of cabinet or retrofits upon request.
POWER RACKS
19“-rack
Racks in various configurations up to 42U as parallel systems are available, or mixed
with electronic load devices to create test systems. Further information in our product
catalogue, on our website or upon request
WC
Water cooling
Replaces the standard cooling blocks of the internal power stages by three intercon
-
nected, water cooled blocks with two taps led out for supply. This options helps to
avoid heating up the environment due to exhausted heat caused by a certain power
dissipation.
As a side effect, this type of cooling also reduces audible noise.
