1. Installation and Getting Started
Install Guide
Page 3
1. Installation and Getting Started
This section describes the basics of how to connect a VGA
Recorder device to a VGA source and to an Ethernet network.
This section also describes how to install the Epiphan Network
Discovery Utility on a workstation running Windows and use the
Utility to find VGA Recorder devices on the network.
Finally, this section describes how to connect to and use the VGA
Recorder Web admin interface to save recordings to the VGA
Recorder internal hard disk and to provide viewer access to these
recordings.
You can also archive recordings to an FTP, CIFS (Windows
network share), or rsync server on your network. You can also
save recordings an external USB storage device such as a USB
hard disk or flash drive. See the
VGA Recorder User Guide
for more
information.
With the VGA Recorder Standard and Pro you can also save
recordings to a recordable CD or DVD using the optional DVD
writer.
This chapter contains the following sections:
•
VGA Recorder Hardware Features
•
VGA Recorder Software Features
•
Connect and Power on a VGA Recorder Lite Device
•
Connect and Power on a Lecture Recorder Device
•
Connect and Power on a VGA Recorder Standard Device
•
Connect and Power on a VGA Recorder Pro Device
•
Using the Network Discovery Utility to Find the IP Address of
the VGA Recorder Device
•
Connecting to the VGA Recorder Web admin interface
•
Using the Web admin interface
