1. Installation and Getting Started
Connect and Power on a VGA Recorder Pro Device
Install Guide
Page 21
3
Connect the following optional components if you have them:
• Connect a composite video source to the RCA composite
video connector on the back of the VGA Recorder Pro
device. If you connect a composite video source you may
have to change VGA Recorder Pro video overlay settings.
See the
VGA Recorder User Guide
for more information.
• Connect a 1/4-inch high quality balanced audio source to
the line in port on the back of the VGA Recorder Pro
device. If you connect an audio source you may have to
change VGA Recorder Pro audio settings. See the
VGA
Recorder User Guide
for more information.
• Or connect a 3.5 mm audio source to the line in port on the
back of the VGA Recorder Pro device. If you connect an
audio source you may have to change VGA Recorder Pro
audio settings. See the
VGA Recorder User Guide
for more
information.
4
Connect the power cable to the VGA Recorder Pro device.
5
Press the Power button on the VGA Recorder Pro front panel
to turn on the device.
The VGA Recorder Pro device powers on and the power and
hard disk activity LEDs light up as the device starts up:
6
Start up the VGA source.
To confirm that the VGA Recorder Pro device is receiving
images from the VGA source connect a monitor to VGA OUT
to check for the presence of a signal.
If the monitor does not show an image, check the VGA source
to make sure it is transmitting a VGA image. Also check the
cable between the VGA Recorder Pro device and the VGA
source to make sure it is connected correctly.
7
Log into the Web admin interface.
See
“Connecting to the VGA Recorder Web admin interface”
on page 25
.
