VGADVI Broadcaster User Guide
7-6 Storage Disk Maintenance
7-6
Storage Disk Maintenance
Your VGADVI Broadcaster is equipped with a solid-state storage drive for storage of recordings. Occasionally,
maintenance is required for these disks. This section describes procedures for the following topics:
l
Check disk storage space
l
Schedule disk check
l
Perform disk check
Check disk storage space
The VGADVI Broadcaster has a finite amount of storage: 8 GB. This storage space holds a lot of recordings, but
it can get full. It’s a good idea to monitor your current disk usage.
If available storage is low, consider removing some unneeded recordings or setting up an automatic file
transfer with deletion after transfer. See
File Maintenance
and
File and Recording Transfer
.
Disk space can also be checked via the tablet interface. See
Verify disk space via the tablet
interface
.
To check disk storage space:
1. Connect to the admin interface using your preferred connection mechanism. See
Connect to the Admin
Interface
.
2. Login as admin or operator.
3. Check the
Internal Storage
section at the bottom of the menu column. The bar will be mostly green if
there is lots of space left, or mostly red if storage space is nearly full.
4. If available storage is low, take action to remove files as discussed in
File Maintenance
and
File and
Recording Transfer
.
165
