epiphan Lecture Recorder X2 User Manual Download Page 15

Page: 15 / 208

Label

Name

Description

Status LEDs

Three LEDs on the front panel indicate the following VGADVI Broadcaster

status:

Solid blue LED

indicates device is starting up or indicates a recording error

during a recording session.

Solid green LED

indicates the device is ready to capture images.

Flashing green LED

indicates files are copied to an external USB drive.

Flashing blue LED

indicates:

a video signal test is in progress;

system tuning, or

VGADVI Broadcaster is recording received images.

Note: If the periodic disk check function occurs during start up, it may take

up to 20 minutes to power up the device. During this time the blue LED is

flashes (two intermittent flashes) and the green LED flashes. See

Storage

Disk Maintenance

for more information.

USB port

Connect to one of the following devices:

big red button for recording control

external HDD

USB flash drive

mouse to start and stop recording

RS-232 serial port for remote control

Note: Using more than one USB device may impact system performance.

S-Video input

Connect to an s-Video source or a composite video source using the

adapter (included).

DVI-I input port

Connect to one of the following sources:

DVI input, use the DVI to DVI cable (included)

VGA input, use the VGA to DVI adapter (included)

HDMI input, ( for non-copy protected content), use the HDMI to DVI

adapter (included)

Audio In

Connect to an audio input source.

Back Panel

This section describes the back panel connectors and indicators.

Summary of Contents for Lecture Recorder X2

















































































































































































































Search results

Summary of Contents for Lecture Recorder X2

Reviews:

Related manuals for Lecture Recorder X2

Brands by name

Popular brands

epiphan Lecture Recorder X2, User Manual

Search results

Summary of Contents for Lecture Recorder X2

Reviews:

Related manuals for Lecture Recorder X2

Brands by name

Popular brands